Conveyor equipped with a special 50.8 mm pitch chain supported on UHMW guides, with drip lubrication system. Upper and side toothed pressure discs are actuated by sensors, valves, and pneumatic cylinders for log guidance. Infeed equipped with side flaps for log centering or prepared for coupling with a milled roller centering system. Cutting width with electric adjustment.
| Specification |
SCB300X4-T-HT |
SCB400X4-T-HT |
|---|---|---|
| Minimum log length | 2000 mm | 2000 mm |
| Maximum log length | 3200 mm (larger upon request) | 3200 mm (larger upon request) |
| Minimum passage height | 150 mm | 150 mm |
| Maximum passage height | 300 mm | 400 mm |
| Maximum passage width | 300 mm | 400 mm |
| Minimum cutting width | 70 mm | 70 mm |
| Maximum cutting width | 300 mm | 300 mm |
| Recommended main motors | 60 HP 4P (4x) | 75 HP 4P (4x) |
| Feed motor | 10 HP 4P (1x) | 15 HP 4P (1x) |
| Side press motor | 1.5 HP (4x) | 1.5 HP (4x) |
| Gauge electric motor | 5.0 HP 4P | 5.0 HP 4P |
| Feed speed | 20 to 80 m/min (VFD required) | 20 to 80 m/min (VFD required) |
| Saws | Ø 550 mm - 100 mm bore with double keyway and holes (6x) | Ø 600 mm - 100 mm bore with double keyway and holes (6x) |
| Total length | 9000 mm | 9000 mm |
| Total length (with integrated centering unit) | 12400 mm | 12400 mm |
| Width | 5000 mm | 5000 mm |
| Height | 3500 mm | 3500 mm |
| Approximate weight (with motors) | 11500 kg | 12500 kg |
|
|
|
|
| Optional features | 19 Nm servo motors (2x) with automatic lubrication, prepared for centering unit attachment | 19 Nm servo motors (2x) with automatic lubrication, prepared for centering unit attachment |
EN 
